Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Gelco Chimney Cleaning in Kannapolis, NC
We service Gelco chimney systems across Kannapolis, from the mill-era houses near downtown to the ranch subdivisions out toward the edges. What sets our Gelco work apart here is the housing itself: many Kannapolis chimneys were built small and later converted, so the real job is often checking whether the original flue was ever sized for what’s now burning in it. Concord Chimney Cleaning is an independent provider. We’re not affiliated with or authorized by Gelco, and we don’t claim any manufacturer warranty – we just know how these components fail in Kannapolis conditions. Call (866) 665-4951 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm.

Why Kannapolis Residents Choose Us for Gelco Service
Most sweep companies in the area turn up, run a brush down the flue, and leave. If they find a cracked tile or a failing crown, you’re told to call someone else. We handle the sweep, the inspection, and the repair under one contractor, which matters when the diagnosis and the fix both point at the same Gelco flue. Our technicians have up to 10 years of experience, and we work with professional-grade product lines rather than whatever generic material is on hand: DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield.
You’ll get a clear written estimate before any work starts, and a photo report from the camera inspection so you can see what we see. No mystery recommendations.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Solve in Kannapolis
- Spalling and cracked clay flue tiles. Freeze-thaw cycles through a Kannapolis winter work on older Gelco 8×8 and 8×12 tiles, and humid summers don’t help. Flaking tile faces let moisture deeper into the flue and rough up the surface where creosote clings.
- Undersized 8×8 flues carrying a wood stove insert. When a mill-era flue was reused for a stove it was never sized for, draft suffers and creosote builds faster. We measure the flue against the appliance and tell you plainly if it’s wrong.
- Parged-over or soot-stained original flues. In the old coal-converted chimneys off streets like Gurley and Bethpage, flue interiors are often coated or blackened, which hides cracks until a camera goes in. Our Level 2 Inspection exists for exactly this.
- Cracked Gelco mortar crowns. A failing crown lets water into the chimney body, and on 1920s-1950s brick that water is what starts the spalling. Repointing and crown repair stop the cycle before it spreads.
- Mis-sized flue tiles under modern gas inserts. A gas insert swapped into a flue built for coal or wood often drafts poorly and runs wet. We verify flue sizing before anyone starts cutting or capping.
Gelco Service in Kannapolis: What Local Conditions Mean for Your Equipment
Kannapolis is a former Cannon Mills textile town, and a lot of the chimney work here happens in the small mill-era houses in the residential grid near downtown. Those homes were built for mill workers, which means narrow masonry fireplaces and tight clay flues. Over the decades many were fitted with wood stoves or gas inserts. The result is that sweeps in Kannapolis spend more time on undersized flues and insert verification than on the wide open-hearth fireplaces you’d find in newer subdivisions to the south.
Where does Gelco come into it? The clay flue tiles and crowns in those chimneys are original or near-original, and decades of intermittent burn seasons leave them vulnerable to moisture and freeze-thaw damage. A flue that was fine with a coal fire will not always be fine with a modern insert. That’s the gap we check for first.
Gelco Models & Products We Service in Kannapolis
We work on the Gelco components that make up a chimney system: 8×8 and 8×12 clay flue tiles, cast-in-place crowns, and custom multi-flue caps. Each one gets serviced or replaced according to what the flue actually needs, not what’s easiest to sell. When direct OEM parts aren’t available, we use OEM-equivalent clay tiles and quality aftermarket caps and dampers that fit the original dimensions. Our repair-versus-rebuild calls come down to flue condition and safe venting, and we explain the reasoning so you can decide.
See the difference
Before
After
Before
After
Before
AfterGelco Service Pricing in Kannapolis
Pricing is set per job by a written estimate. A standard sweep typically runs a modest flat rate, a Level 2 Inspection with camera work costs more because of the equipment and reporting time, and repairs like Mortar Repointing or crown work are quoted separately once we know the extent. The estimate is free, the sweep price is agreed before we book, and the camera inspection with a photo report is included so nothing is recommended on trust alone.
If a repair can safely wait until the next burn season, we’ll tell you. Call (866) 665-4951 for an exact quote.

Serving Kannapolis, NC – Our Local Coverage Area
We serve Kannapolis and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gelco Chimney Cleaning in Kannapolis
Why do Gelco clay flues in Kannapolis mill houses need special attention? They’re often original, undersized for what’s now burning in them, and prone to spalling from freeze-thaw and humidity. Call (866) 665-4951 to book an inspection.
How often should I clean my Gelco chimney in Kannapolis’s intermittent burn season? Once a year is the usual benchmark, even in a light-burn winter, because an idle flue still collects creosote and wildlife. We’ll check creosote depth and give you an honest interval.
Can you repair spalling Gelco brick on my 1950s Kannapolis chimney? Often yes, through repointing and crown repair, though severe cases need more. The camera inspection tells us which it is.
What should I expect if my Gelco flue was converted from coal to gas? Expect us to check for abandoned coal cleanout doors and a parged-over or soot-stained interior before any sweeping. That history changes how the flue gets serviced.
Do you install Gelco multi-flue caps in Kannapolis? Yes, we install custom multi-flue caps as part of repair and protection work, sized to your chimney. Call (866) 665-4951 for a free estimate.
Service Areas Near Kannapolis
We also work in Kannapolis-area communities including Concord, Landis, China Grove, Granite Quarry, and Salisbury. If your chimney is in one of these towns, the same independent Gelco service and written estimate apply.
Book Your Gelco Service in Kannapolis Today
Call (866) 665-4951 to schedule a Gelco sweep, inspection, or repair. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, and you’ll see the camera evidence before anything is recommended.
Written by the team at Concord Chimney Cleaning.