Chimney Repair in Concord - Inspected on Camera, Then Priced in Writing

Trusted Chimney Repair for Concord Homeowners

A cracked crown, a rusted cap, or a flue liner that’s seen better days doesn’t fix itself, and a sweep who finds the damage but can’t repair it leaves you calling around for a second contractor. That’s the gap we fill. Our technicians have up to 10 years of experience, and they handle the sweep, the inspection, and the repair under one roof, so the person who spots the problem is the same company that makes it right. We work in Concord with professional-grade liner systems, resurfacing products, caps, and venting components from name brands like HeatShield and DuraFlex, not anonymous materials from an unnamed supplier. Same-day service is often possible when you call early. Reach us at (866) 665-4951, and we’ll get a written estimate in your hands before any work begins.

Call (866) 665-4951

Chimney Cap Installation

Chimney Cap Installation is the fitting of a protective cover over the top of the flue that keeps rain, animals, and debris out while letting smoke escape. You need one when the flue is open to the sky, when birds and squirrels have found their way in, or when sparks are landing on the roof. We fit caps from Gelco and Olympia Chimney, matched to your flue size and the type of appliance you burn. A typical cap install in Concord runs $150-$450 depending on the flue configuration and the cap style. The written estimate sets the final price.

Single-Flue and Multi-Flue Options

A single-flue masonry chimney takes a straightforward cap, while a chimney with two or three flues needs a wider cover sized to protect each opening. We measure each flue and match the cap so it sits level and seals against the crown. Getting the fit right the first time avoids the rattle and shifted coverage that comes from a one-size cap.

Stainless and Powder-Coated Steel

Stainless holds up best to long-term weather exposure, while powder-coated steel gives you color options that blend with the roof. Both do the same core job: shedding water and blocking animals. We’ll tell you which makes sense for your chimney and why.

Chimney Cap Replacement

Chimney Cap Replacement is the removal of a damaged or missing cap and the fitting of a new one in its place. It’s time when the old cap is rusted through, dented from storm debris, or was never the right size to begin with, leaving gaps where water and wildlife get in. We remove the old unit, check the flue and crown underneath, and install a new cap from Olympia Chimney or Gelco. Most replacements in Concord run $175-$500 depending on the cap type and how much of the old hardware has to come off. The written estimate sets the final price.

Why an Old Cap Fails

Steel rusts from the inside out when a cheap cap traps moisture against the metal, and mesh screens tear loose over time. Once the mesh is gone, the cap stops keeping animals out even though it still looks like a cap. We check the mesh and the mounting before recommending a swap.

Matching the Cap to the Appliance

A wood-burning flue needs a cap with a spark screen, while a gas appliance may need a different venting setup. We match the replacement to what you actually burn. That way the new cap does its job without restricting draft.

Chimney Liner Installation

Chimney Liner Installation is the fitting of a new flue liner inside the chimney to contain smoke and gases and protect the surrounding masonry from heat. You need it when the original clay liner is cracked, when the flue is unlined, or when a new appliance requires a correctly sized liner. We install DuraFlex flexible liner systems, which flex around offset and angled flues that rigid-only contractors have to turn down. Many homes in Concord have that kind of chimney, and it’s not a problem for us. Liner jobs in Concord typically run $2,000-$5,500 depending on the height of the chimney, the liner diameter, and the complexity of the flue. The written estimate sets the final price.

When Restoration Beats Replacement

Not every deteriorated liner needs to come out. Where the damage is moderate, HeatShield ceramic resurfacing can restore the liner from the inside without a full replacement, and it’s a cost-saving option most basic sweep companies can’t offer. We’ll show you the camera evidence and let you decide.

Flexible Liners for Offset Flues

Older chimneys often jog to one side to clear a roofline or a structural beam, which makes a rigid liner impossible to run. DuraFlex flexible systems follow that path and still give you a continuous, sealed liner. It’s one reason we lean on that product line for complex jobs.

Chimney Flashing Repair

Chimney Flashing Repair is the work of sealing or replacing the metal that bridges the gap between the chimney and the roof, where leaks most often start. You need it when you see staining on the ceiling near the chimney, rust on the flashing, or gaps where the metal pulls away from the masonry. We reset or replace the flashing and seal the joints so water runs off the roof instead of into your attic. Flashing repair in Concord usually runs $250-$700 depending on the roof pitch and the extent of the damage. The written estimate sets the final price.

Signs of a Leak at the Flashing

Water stains on the ceiling or along the chimney breast after heavy rain point to flashing first. Loose screws, cracked sealant, and rust holes are the usual culprits. Catching it early keeps the repair small.

Step and Counter Flashing

Step flashing weaves into the roof shingles, while counter flashing overlaps it against the brick. When either piece fails, the whole joint leaks. We rebuild both layers so the seal holds through freeze and thaw.

Chimney Crown Repair

Chimney Crown Repair is the fixing or rebuilding of the concrete slab on top of the chimney that sheds water away from the flue and masonry below. You need it when the crown is cracked, crumbling, or pulling away from the flue, because a failing crown lets water soak into the brick and freeze. We repair minor cracks and rebuild badly damaged crowns so they slope correctly and seal against the flue. Crown repair in Concord typically runs $300-$900 depending on the crown size and whether a full rebuild is needed. The written estimate sets the final price.

Cracks and Water Damage

A hairline crack grows as water freezes inside it, and over a few winters the crown can split apart. Once that happens, water runs down the flue and into the masonry. A timely repair stops the cycle.

Sealing the Crown to the Flue

The joint where the flue meets the crown is a common leak point even when the slab itself looks fine. We reseal that connection so the crown does the job it was built to do. That means keeping moisture out of the chimney from the top down.

Chimney Repair Companies

Chimney Repair Companies vary widely in what they actually do, and that difference matters when you’ve already paid for a sweep and been told you need work. Some sweep outfits find damage and leave you to find a mason; others are masons who don’t inspect the flue. We handle all three services, so nothing falls between the cracks. Our repair work is backed by named-brand product quality, so you know exactly what’s going into your chimney. In Concord, repair work across these categories generally runs $150-$5,500 depending on the scope, and the written estimate sets the final price.

What to Look For

Ask whether the company does the sweep and the repair, or just one. Ask what brand of liner or cap they’ll use, and whether they’ll show you the camera footage. A company that can answer both is one you can hold accountable.

Why One Contractor Matters

When the sweep, the inspection, and the repair all come from one company, there’s no finger-pointing over who found what. You get one estimate and one point of contact. That’s how we run every Concord job.

Chimney Masonry Repair

Chimney Masonry Repair is the restoration of the brick and mortar in the chimney structure itself, from repointing joints to replacing spalled brick. You need it when the mortar is washed out, bricks are flaking, or the chimney leans or shows a white chalky bloom that signals moisture moving through. We address the masonry within the chimney system, repointing joints and replacing damaged brick so the structure stays sound. Masonry repair in Concord usually runs $400-$2,500 depending on how many courses need work and how high the chimney is. The written estimate sets the final price. This is chimney work, not general roofing or whole-house masonry.

Repointing Mortar Joints

Mortar is the softer part of a brick wall by design, and it erodes first. Repointing replaces the worn mortar without damaging the brick face. Left alone, eroded joints let water in and the brick starts to break down.

Spalling Brick and Efflorescence

Flaking brick faces and white mineral bloom both point to moisture working through the masonry. Fixing the source, whether it’s the crown, the flashing, or the joints, stops the damage. Fresh brick and mortar follow.

Brands We Service

We work with DuraFlex flexible liner systems, and we know where they shine: offset and angled flues that a rigid liner can’t follow. HeatShield is our resurfacing system for liners that are deteriorated but not beyond saving, and it’s a repair option that saves full replacement cost when the damage allows. Gelco and Olympia Chimney supply the caps and covers we fit on Concord chimneys, sized to the flue and matched to what you burn.

Famco and Copperfield cover venting components and specialty chimney hardware, which rounds out the parts side of a repair so you’re not stuck waiting on a generic substitute. Whether you have Gelco, Olympia Chimney, or any other make, we can help.

Signs You Need a Pro Right Now

• Water stains near the chimney. Brown rings on the ceiling or down the chimney breast usually mean flashing or crown trouble. Left alone, that water reaches the framing.
• A strong smoky or creosote smell. A persistent odor even when the fireplace is cold can signal a blocked flue or heavy creosote buildup. Both are worth a look before the next fire.
• Crumbling mortar or flaking brick. When joints wash out or brick faces start to spall, the structure is losing its weather shield. Repointing early is cheaper than rebuilding later.
• A missing or damaged cap. An open flue invites rain, birds, and squirrels, and a torn spark screen lets embers reach the roof. A new cap closes the gap.
• Smoke backing into the room. Smoke that won’t draw up the flue points to a blockage, a liner problem, or a sizing issue. Get it checked before you light another fire.

Our Process, Step by Step

1. 1
   We start with a chimney inspection. Before any repair, we run a camera down the flue and look at the crown, cap, flashing, and masonry from the outside. You see the footage, so the recommendation rests on evidence rather than a guess.
2. 2
   We give you a written estimate. The estimate lays out what we found, what we recommend, and the price for each item. You’ll know which work can safely wait and which shouldn’t.
3. 3
   We schedule the repair. Sweep, inspection, and repair all run through us, so there’s no handoff to another contractor. The job is booked, and we confirm the scope before we start.
4. 4
   We do the work with named-brand materials. Depending on the job, that could be a DuraFlex liner, HeatShield resurfacing, or a Gelco cap. You know the system going into your chimney by name.
5. 5
   We walk you through the finished job. We show you what was replaced, how it was sealed, and what to watch for going forward. You leave with a clear picture of your chimney’s condition.

How Much Does Chimney Repair Cost in Concord?

Our Service Area Near Concord

We serve homeowners throughout Concord and the surrounding towns, including Kannapolis, Harrisburg, Huntersville, Davidson, Landis, China Grove, Granite Quarry, Salisbury, and Spencer. Response times depend on where you are and how the schedule fills, so call and we’ll give you the next available window. If you’re in Landis or China Grove, we cover your area too. We answer 24/7, and fast dispatch from 7am to 7pm, Sunday through Friday.

Frequently Asked Questions About Chimney Repair in Concord

Schedule Your Chimney Repair Service in Concord Today

Whether it’s a cracked crown, a rusted cap, or a liner that needs attention before the next burn season, we’ll inspect it, show you the evidence, and give you a written estimate before any work begins. One company handles the chimney repair, the sweep, and the inspection, so nothing gets left for someone else to finish. For chimney repair in Concord and the surrounding towns, call (866) 665-4951. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Our estimates are free and there’s no obligation.

Written by the team at Concord Chimney Cleaning.